People also ask, how do I clear a paper jam in my Epson printer?
Similarly one may ask, how do I troubleshoot my Kyocera printer? Check the cable running from the Kyocera printer to the computer, if you get no response when sending a print job. Remove the cable at both ends, then reseat it carefully. If that does not work, shut down both the printer and the computer, then power on the printer and wait for it to come to ready mode.
Moreover, how do you clean the drum on a Kyocera printer?
Remove the clip and spring that holds the drum and developer/toner unit together. Remove the drum shaft and drum – pop the shaft on the left hand side of the drum unit towards you and side it out. Remove the drum cleaning blade. Replace the drum cleaning blade with a new one and re-assemble in the reverse order.
How do you fix a paper jam issue?
Remove the paper following the procedure below.
- Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier. …
- Open the Rear Cover. …
- Pull the paper out slowly. …
- Close the Rear Cover.
- Reload the paper, and press the RESUME/CANCEL button on the printer.
How do you open a Kyocera printer paper jam?
How do you reset a printer?
It’s a pretty simple process:
- With the printer turned on, pull out the power cable from the back of the printer.
- Unplug the power cable from the wall outlet.
- Wait 15 seconds.
- Plug the power cable into the back of the printer.
- Plug the printer back into the wall outlet.
- Turn the printer back on.
- Run a test print.
What causes paper jam in Kyocera printer?
Paper inserted incorrectly.
This tends to be the number one cause, and there’s a lot that can go wrong while you’re loading the paper in the input tray. Sheets stuck together, folded or frayed paper, and an overloaded tray can all create problems. Even using the wrong type of paper can cause paper jams.