The most common dimensions for a cinder block are approximately 8-by-8-by-16 inches. The actual measurements, however, are 7 5/8-by-7 5/8-by-15 5/8.
Similarly one may ask, how do you calculate the number of blocks from a building plan?
After you have found the square footage of both your wall and your block, determining the number of blocks you need is as simple as dividing the wall square footage by the block square footage. If you’re using a standard 16″ x 8″ x 8″ block, find the number of blocks needed by dividing the wall square footage by 0.89.
| Block Width | Cost |
|---|---|
| 6” | $1.75 |
| 8” | $2 |
| 10” | $2 |
| 12” | $3 |
Moreover, how tall is a standard concrete block?
Typically, concrete masonry units have nominal face dimensions of 8 in. (203 mm) by 16 in. (406 mm), available in nominal thicknesses of 4, 6, 8, 10, 12, 14, and 16 in.
What are the dimensions of a 12 inch concrete block?
What is the difference between a cinder block and concrete block?
Cinder block is made of concrete and cinder. Concrete block is produced from steel, wood or cement. Cinder block is lighter than concrete blocks. Concrete block is heavier because it contains stone and sand.