Why are all the lights flashing on my HP Officejet 100 Mobile printer?

The lights on the front of the printer indicate the printer status. These lights can be on, off, or blinking (flashing), depending on the status of the printer. Blinking lights can indicate error conditions. They might also indicate that the printer is starting up, processing a print job, or charging batteries.

>> Click to read more <<

Keeping this in view, how do I connect my HP Officejet 100 Mobile Printer to Bluetooth?

HP Officejet 100 Mobile Printers (L411a and L411b) – Printing a Bluetooth Configuration Page

  1. Load plain white paper into the tray.
  2. On the product control panel, press and hold the Bluetooth button ( ) for three seconds. The Bluetooth configuration page prints.
Herein, how do I connect my HP OfficeJet 100 printer to my iPhone? The only way you could connect your iPhone to your OfficeJet Mobile 100 is through a Bluetooth connection, since that is the only way the Mobile 100 will connect.

Beside this, how do I make my HP Officejet 100 Mobile discoverable?

Set the Bluetooth security settings

  1. Click the HP Utility icon in the Dock. …
  2. Under Printers, click your product, if more than one printer is listed.
  3. Click Bluetooth Settings.
  4. To require users to type a six-digit PIN code before sending a print job from their Bluetooth device, follow these steps:

How do I reset my HP Officejet 100 Mobile printer?

Step one: Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet.
  3. Wait at least 15 seconds.
  4. Plug the power cord back into the wall outlet.
  5. Reconnect the power cord to the printer.
  6. Turn the printer on.

What do I do when the power button on my HP printer is blinking?

If you wait several minutes and it continues to blink, turn the printer off, then back on. If it will not turn off, unplug the power cord from the back of the printer. Unplug the power cord from the power source. Wait 30 seconds, then plug the power cord back into the power source.

What is an ink service module?

The Ink Service Module (ISM) is where the ink goes to when the print cartridges are being serviced. For a typical customer, they should not have to replace the ISM during the life of the printer.

What is the pairing code for HP Officejet 100 Mobile Printer?

000000

Why is the paper light flashing on my HP printer?

During printing, the printer stops feeding pages, and the Attention light on the printer’s front panel blinks. This indicates that paper might be jammed inside the printer. note: … The printer might report a paper jam even when there is no jammed paper.

Leave a Comment