When Buying a new set of skateboard trucks you first need to know the deck width you will be using them with. For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75″ deck matches a 5.0″ truck, an 8.0″ deck matches a 5.25″ truck.
Thereof, are 54mm wheels good for street skating?
54mm is probably the best all rounder if you are looking at skating a big variety of terrain. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice.
Keeping this in view, do all bushings fit all trucks?
Bushing tightness depends on each rider’s preferences, and bushings can be easily adjusted to suit your needs. Skateboard truck bushings are all the same size, and will fit any skateboard, longboard, or cruiser sold on Warehouse Skateboards. Check out the available skateboard truck bushings currently in stock.
Do all skateboard trucks fit all decks?
To determine the width of a skateboard truck, you measure the width of the axle (outer width) and the width of the hanger (inner width). The trucks should always fit the width of your Skateboard. … If your deck is slightly wider than your trucks, it’s no problem.
How do I know what size trucks I have?
Truck size is measured by axle width or hanger width. The width of the hanger and axle determines how far apart your wheels are. The width of your trucks will affect the performance of your board, since different truck widths are better suited for certain riding styles.
How good are Thundertrucks?
Thunders grind great but they wear down faster, Venture is in the middle indys wear down the slowest. Indys are great for chunky ledges because of all the metal on the truck. At a certain point, grooves will start to form which helps you to lock-in you grind.
Is 100A good for street skating?
Hard Wheels
Anything between 96A and 100A is fine for regular street skaters, a safe choice would be 99A. Pro skaters for often skate wheels between 100A and 84B, some even go beyond that. These wheels are not comfortable on rough roads, they also tend to slide on slick surfaces.
What are 58mm wheels good for?
A larger wheel helps you skate rougher ground and ride up transitions easier. You can still skate street with larger wheels, but it will result in your skateboard feeling heavier. Wheels between 55-58mm are great for skating slightly rougher terrain or for skating bowls and ramps at a skatepark.
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you‘re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
What size are Venture trucks?
Venture Trucks Size Chart
| Venture Trucks Size | 5.0 | 5.2 |
|---|---|---|
| Axle Length | 7.62″ | 8.0″ |
| Suggested Deck Width | 7.6″ and below | 7.9″ – 8.12″ |
What size truck is 149?
Independent Skateboard Truck Size Chart
| Truck Size | Axle Width (in) | Skateboard Deck Width (in) |
|---|---|---|
| 149 | 8.5 | 8.375 – 8.6 |
| 159 | 8.75 | 8.6 – 9 |
| 169 | 9.125 | 9 – 9.5 |
| 215 | 10 | 9.5 – 10.5 |
What size trucks fit a 8.25 deck?
Size Guide – Skateboard Trucks
| Skateboard Truck Size Guide | ||
|---|---|---|
| Deck Size | Hanger Width | Axle Width |
| 7.5 to 7.75″ | 127mm / 5″ | 193mm / 7.6″ |
| 7.75 to 8.25″ | 137mm / 5.25″ | 203mm / 8″ |
| 8.25 to 8.75″ | 149mm / 6″ | 215mm / 8.5″ |
What size wheels do I need for a 8.0 deck?
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |