You can apply glue to the entire bed, or just where the part prints. If you apply a thin layer of glue, you can apply it before each print. If you notice glue buildup (an uneven, pitted looking surface) wash the residual glue from the bed with warm water and dry with a paper towel. The bed is waterproof.

16:9 (1.77:1) is a widescreen aspect ratio with a width of 16 units and height of 9. Once seen as exotic, since 2009, it has become the most common aspect ratio for televisions and computer monitors and is also the international standard format of digital television HDTV Full HD and SD TV.

You have to setup your printer to take 11 x 14 in the Print dialog. Click on Print Settings, select the paper size, save the settings and you should be able to print to 11×14 if your printer can.

Using the recommended paper weight has a good impact on a printer and quality of the final print job. … 100gsm to 120gsm – This is stationary paper used for standard letterheads, complimentary slips. 130 to 170gsm – Mostly used for leaflets, posters, single-sided flyers, and brochures.

A Machine Identification Code (MIC), also known as printer steganography, yellow dots, tracking dots or secret dots, is a digital watermark which certain color laser printers and copiers leave on every single printed page, allowing identification of the device with which a document was printed and giving clues to the …

Make 3 copies directly from the printer without any communication from the computer to eliminate hardware issues with it. If it copies correctly, then uninstall and reinstall the printer software and drivers and it should resolve it. If it comes out crumpled, then try a different brand of paper and check again.

>> Click to read more << Also know, how do I print pictures from my Iphone to my HP printer? …

Read more

You will almost always want to use a laser printer for resume printing. … Choose between the various resume paper weights, textures, compositions and resume paper colors. We recommend something not too overstated, that communicates a prepared, clean, and polished look.

Voted Best Answer You don’t have to save the document as one A3 page, you can print two A4 pages on one sheet. On the print dialog select the “Multiple” button in the section Page Sizing & Handling, then you can select Pages per Sheet to 2 and the page order to Horizontal. That should do the trick.

Load photo paper Open the paper tray door, pull out the paper tray, and then slide the paper width guides to their outermost positions. Load a stack of photo paper into the tray, with the short edge facing toward the product and the print side down.