How to Connect Studio Monitors To Your Computer Without An Audio Interface

Hey guys! I’m going to share with you, how to connect studio monitors into a laptop without using your audio interface. So if you don’t have an audio interface, this is a cheap sort of alternative. But yeah, I’d recommend it only temporary. Because there’s a lot of other issues, that come along with it.
So if you want to do this, you’re going to need a cable. Which has quarter-inch tracks at the end, and then on the other end. It’s got just a headphone jack for your computer. And then Basically, what we’re going to do is plug this end it and in making sure that the monitors are off.
We plug this end in and then get one of these ones, and plug it into this input. Make sure your monitors on a full DB. We do the same to the other one pretty simple, pretty straightforward and then switch your monitors on.
So this is pretty much. So that you can play YouTube music or stuff from iTunes or if you make your own music, it’ll play through these speakers. Just a quick tip make sure that the that this jockey is plugged in before you turn on your speakers.
Because I had this problem. If your speakers are turned on and you plug it in you’ll get like a popping sound. It’s really bad for your motors. So all the best. Best of luck.

Leave a comment