The printer does not pick up or feed paper from the tray, and An ‘Out of paper’ message displays on the control panel. … Check the condition of the paper, make sure that the printer rests on a flat surface, adjust the paper settings in the print driver, and clean the paper feed rollers to resolve the issue.
Subsequently, how do I manually reset my HP printer?
To restore the product to the factory-default settings, follow these steps.
- Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
- Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
- Release the Resume button.
Regarding this, how do I reset my HP printer error message? Reset the printer to recover from printer failures.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.
Beside this, how do I reset my printer to factory settings?
It’s a pretty simple process:
- With the printer turned on, pull out the power cable from the back of the printer.
- Unplug the power cable from the wall outlet.
- Wait 15 seconds.
- Plug the power cable into the back of the printer.
- Plug the printer back into the wall outlet.
- Turn the printer back on.
- Run a test print.