The cost tends to be about $2 to $2.50 per square foot, or $1,000 to $1,300 for a 500-square foot area. Professionals who can resurface your paving are typically also experienced in a complete repaving. However, not all contractors who can complete repairs are also able to resurface or replace.
People also ask, how much is a dump truck load of asphalt?
A concrete driveway 90 feet long and ten feet wide would be around $1800 for materials plus an additional $2000 or so for labor, for a total cost of nearly $4000. Asphalt driveway paving costs $2-$6 per square foot installed. For a 500 square foot (50 x 10) driveway this works out to an average cost of $2500.
Likewise, what is the price of asphalt? The cost of asphalt ranges from $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it in tonnes, however, and that is how these calculations will be carried out. The average price of good quality asphalt is $85 to $150 per ton.
Consequently, does Lowes sell asphalt patch?
Road Rescue 50 Pound(S) Asphalt Patch at Lowes.com.
Can you put new asphalt over old asphalt?
Asphalt Resurface (over Asphalt): A #404 surface course of asphalt can be installed on top of existing asphalt. Putting new asphalt on top of existing problems won’t make them go away. The time to correct them is before you install the new asphalt.
17 Related Question Answers Found
Can I Asphalt my own driveway?
Do it Yourself Asphalt Driveway. Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
Is 2 inches of asphalt enough for a driveway?
The granular base aggregate used for a residential driveway is typically 6 to 8 inches. On top of this layer, residential driveways typically use 2 to 3 inches of asphalt, whereas commercial driveways use about 3 inches.
How many tons of asphalt are in a dump truck?
Our largest single dump truck can hold up to 20 tons in a load or 20 cubic yards of mulch.
How many square feet will 1 ton of asphalt cover 2 inches thick?
The area that 1 ton of asphalt covers depends on the thickness of the asphalt to be used; for a half-inch thick section of asphalt, 1 ton will cover approximately 316 square feet, while 1 ton of asphalt will cover 79 square feet when laid several inches thick.
Is asphalt cheaper than concrete?
Cost. Ignoring any maintenance costs, asphalt is generally much cheaper to install than concrete. On average, the cost per square foot for asphalt will run between $2.50 to $4.00. It’s not unheard of to have a stained concrete driveway with a smooth finish cost over $15.00 per square foot.
How much does it cost to pave a 100 foot driveway?
The average cost of a concrete driveway, by comparison, is almost $7,400. Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.
What is the cheapest type of driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
What is the best asphalt patch?
What is the Best Asphalt Patch? The best asphalt patch is hot mix asphalt. To get the absolute best repair of the pothole, the asphalt next to the pothole must be reheated and blended into the patching material.
How much does cold patch cost?
Hot Patch & Cold Patch Costs Cold patch: $10-$20 for a 50 pound bag.
How do you harden cold patch asphalt?
Plug the hair dryer into the extension cord. Operate the hair dryer in a sweeping motion. Blow hot air over the patch until you cannot easily press into the material. Keep blowing as long as it takes to harden the patch, since it is mostly the air flow that cures it faster.
Can you buy asphalt in a bag?
Additional Info The larger 50 lb / 22 kg bag of EZ Street cold asphalt is designed with professionals in mind. The bag is manageable and affordable, but suitable for larger patches. Keep a bag in the back of your truck for quick repairs. Unopened, it can stay workable for up to one year.
How much is a bucket of asphalt?
Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material’s condition and texture. Average Asphalt Sealer Prices. Type Per Square Foot Per 5 Gallons Asphalt Polymer Emulsion $0.10 – $0.17 $85 Cole Tar $0.18 $90 Acrylic $0.20 $100 Fast-Dry $0.06 $30
How do you fix cracks in asphalt?
Fixing Smaller Cracks in Asphalt (1/8 in – 1/2 in) To fill smaller cracks you should use rubberized asphalt-emulsion crack filler. Apply the filler using a caulking gun if available. Use a putty knife or trowel to smooth out the surface of the crack.
How do you fix alligator cracks in asphalt?
Alligator cracking in asphalt pavement is a sign of a failure under the asphalt surface. Filling in the alligator cracks with a patching product only offers a temporary repair solution. Any area with alligator cracks should be sawcut and removed and the base should be inspected and corrected depending on what is found.
What is cold patch asphalt?
Cold Patch contains 90% recycled material and is designed for repairing and patching blacktop surfaces. It is designed to have the repaired area ready for use immediately after job is complete. Cold Patch has no odor and a very low VOC content. Simply dump out of bag, tamp and the job is complete.
How do you use quikrete asphalt patch?
Project Instructions Square the pothole edges as much as possible and pour the repair material into the hole (overfill the hole about 2 to 3 inches above the surrounding asphalt). Consolidate and compact the Blacktop Repair with a tamper until a firm surface is achieved.
How long do asphalt driveways last?
12 to 20 years