How do you set the HPM 24 hour analogue timer?

by

VIDEO

Considering this, how do you set an analog timer?

How to Set a Mechanical Timer

  1. Step 1: Select the Timer Setting. Move the button on the side of the timer to the position for timer.
  2. Step 2: Plug in the Timer. Insert the timer into the outlet, aligning the three prongs on the back of it with the outlet.
  3. Step 3: Set the Current Time.
  4. Step 4: Position the Pins.
  5. Step 5: Test It.

Additionally, how do I reset my digital timer?

  1. Press the reset button. The reset button is the small round white recessed button on the right side of the timer face.
  2. Set the clock. HOUR: Press the clock button and simultaneously press the HOUR button until you arrive at the correct hour.
  3. Program your settings.
  4. Set to automatic.

Also Know, how do you set a 24 hour timer?

  1. Verify that your lights and switches are working before attaching the light timer.
  2. Turn the light switch to the “on” position.
  3. Plug the light timer into the wall outlet.
  4. Set the dial to indicate the current time of day.
  5. Set your timer switch to “auto.” This switch has at least two settings: “on” and “auto.”

What does CTD mean on a timer?

Countdown Timer Mode

5 Related Question Answers Found

How do I program my HPM d817 2?

Press and hold the SET Button until the day shown on the LCD flashes. Press either the [Arrow-Up] or [Arrow-Down] button to select the correct day of the week. NOTE: Holding down either the [Arrow-Up] or [Arrow-Down] button speeds up the selection process. Press the SET Button again to confirm your selection.

What is a digital timer?

Description. Digital timers keep track of timing; to trigger an action, to start timing once triggered by an action, or both. Some products are programmable while others may be fixed at a set internal time and function.

Why does my light timer not work?

If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Turn the light on manually via the switch timer. If the light still fails to turn on, the light bulb might be burned out. Replace the bulb with a new one.

How do you set a Toptronic timer?

Step Key Programming 1 Press P Setting 1 ON time (display 1 on) 2* Press D+ Select days of week (if you want the same settings every day, you need not press this key) 3 Press H+/M+ Set hours and minutes 4 Press P Setting 1 off time (display 1 off) 5 Press D+ Select days of week (if you want the same settings every day,

How do you set a PIN timer?

Steps Find the outlet closest to your device. Flip the manual switch button to “Timer On” and insert the timer into the outlet. Turn the dial clockwise to the current time. Pull or push the timer pins up or down around the dial to set the device time. Connect your electrical device to your plug timer.

Leave a Comment