Sand Pad. Sand spread out on your pool site is a traditional method of installing an above ground pool. Just like commercial pads, you can use the sand alone or place it on top of concrete. However, you should note that sand might make your pool to be unstable when on top of concrete.
Regarding this, do you need to put sand under an above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
Also, can you put a pool on grass? Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. Since natural grass does get muddy and can be quite slippery when wet, there are also issues around safety and, of course, tracking mud and wet grass into the house.
Similarly, you may ask, what can you put under a swimming pool?
5 Answers
- roofing felt (tar paper).
- Ice and Shield roofing membrane.
- rubber pond liner.
- epoxy (if it’s not terribly rough, a few coats of epoxy concrete sealer might smooth it out)
What is the best base for an above ground pool?
Mason sand or stone dust base material is used most often. Mason sand, also known as pool sand, will create a very smooth bottom layer and is the most popular choice.
15 Related Question Answers Found
Should I put sand under my Intex pool?
I use a little sand under Intex pools, to cushion the bottom, but not for leveling. You can then just use a ground cloth over the dirt or you could cover the area with an inch or so of sand. A twenty four foot pool would probably use about 3 tons of sand.
How do you prepare the ground for an above ground pool?
Yard Preparation Step 1: Placement. The first step is deciding where you want to place the swimming pool in the backyard. Step 2: Clean the Area. Remove all items that could make it difficult to secure a proper foundation for the pool. Step 3: Measure. Step 4: Start Digging. Step 5: Level the Pool Hole. Step 6: Wait 24 hours.
What kind of sand do I put under my pool?
Mason Sand, For Your Pool’s Base Mason sand, sometimes called mortar sand, can normally be found at any sand/gravel yard or masonry supply yard. It is usually measured in yards. It is very fine and should not contain any rocks or pebbles.
How do I level my yard for an above ground pool?
Take the time to level the ground the first time. Hammer a metal stake where the center of the pool will be. Tie a length of string about 6-inches longer than the radius of the pool to the stake. Remove all grass, sod and other vegetation from the marked pool area with shovels or a powered sod cutter.
What can I use instead of sand under my pool?
You could go with a thin layer of sand. Smooth it out, wet it down and pack it down good. Over top of that you could use carpet foam, carpet felt, indoor/outdoor carpet, something along those lines that can be found in the remnants, cutoffs or discount racks of carpet stores.
Can you put an above ground pool directly on grass?
Above ground pools can be installed in the space of a few hours and can be set up on sand, ground cloth, concrete or directly on your lawn. Preparing the ground is an essential step to help protect the bottom of your pool from tears and punctures.
What is a gorilla pad for pool?
Gorilla Pads are pre-cut floor pads designed to protect and cushion the bottom of above ground pools. Unlike old pool foam padding, which can be easily be cut or pierced by grass, roots, or rocks under your above ground pool liner, Gorilla Bottom pool floor padding is impervious to almost any sharp object.
Can I put a tarp under my pool?
It’s OK to use a tarp under the sand but not in place of it. A tarp will allow all the lumps and bumps of a dirt base to show through into the base of your pool. With just a tarp you still have to have a cove for the pool to be safe. The cove can be dirt, sand or foam, but it has to be there.
How do I keep grass from growing under my pool?
Grass growing through liner Clear the area under the pool of all grass, it helps to do so out two or three inches beyond the pool to keep vegetation from growing under your pool. Use an under pool liner barrier of some type, such as a pool ground cloth. Speak with an expert at a local pool store for additional suggestions.
How many bags of sand do I need for a 15 foot pool?
For a pool that is 15ft x15 ft. which works out to be 225 square feet, for every inch of sand for your 225 sq. ft. area, you will need 38, 50lb bags of sand.
How do you prepare the ground for an Intex pool?
Use a line level on the string to measure for level at 12-36 points around the pool. Use flat shovels or a sod cutter machine to remove turf, and lower the high spots. Add a one inch layer of sand. The Wrong Way: Raise the low spots by adding sand – not checking for level.
Can you put plywood under above ground pool?
Plywood. It’s costly to buy enough plywood to place directly beneath the entire pool. You also create the risk of a wood splinter puncturing the pool liner. Instead, measure the size of the pool’s leg supports and cut plywood pieces that can sit directly under the legs.
Do I need sand under my pool?
The only pools that require sand as a base are vinyl lined ones. The sand is easily troweled flat and smooth and provides a compactable surface free of any rocks or debris with sharp edges that could puncture the liner. Nowadays, it is mostly only used under above ground pools.
How do you smooth out a pool liner?
Let your pool Heat up – Liners often develop wrinkles in cold water. These colder temperatures cause the liner to harden forcing it to wrinkle. Before Trying anything, consider heating the water up to 90 degrees or warmer so that the liner softens. Then try working out the wrinkles with your feet or plunger.
Can you use sand to level a pool?
Lay out a layer of sand 1 to 2 inches (2.5 to 5.1 cm) deep across the work area, then roll over it with the tamper. If there are any areas that you need to level, use crushed limestone instead of sand.